Known issues
Troubleshooting basics for mini excavators
Start with the symptom, run the direct checks, and note which component may need inspection or replacement before ordering.
Symptoms and solutions
Three common faults to check first
Each entry lists a typical symptom, the checks to run, and the components most often worn in that system.
Hydraulics
Loss of hydraulic power
Slow or weak movement often points to low fluid, a clogged filter, or worn pump seals. Check fluid level and filter condition, then inspect seals and hoses for leaks before replacing parts.
Drive tracks
Track tension problems
Loose or uneven tracks can come from tensioner wear or a worn idler. Measure track sag against the service spec, check the tensioner for leaks, and inspect rollers and idlers for wear.
Electrical
Starter will not engage
A clicking or dead starter usually traces to battery condition, loose terminals, or a worn starter solenoid. Clean and tighten connections, test battery charge, then inspect the starter before ordering a replacement.
If symptoms persist after these checks
Contact the support team with your machine model and the symptoms you are seeing so they can help confirm the right part.